Semiconductor assembly and test
Burn-in boards, load boards, probe cards and test sockets for back-end lines.
Repair lab open in Laguna Technopark
Failed test board? We bring it back, tested and under warranty.
Component-level repair for burn-in boards, load boards, probe cards and equipment boards. Often for up to 70% less than buying new.
- 100% tested before return
- 3 months warranty, up to
- ₱0 assessment, no minimum order
- Since 1993
Drag to rotate. Tap a number.
Repair point 1 of 7
Contact fingers
- What goes wrong
- What we do
- How we prove it
Four ways we keep your line running
Repair is most of our work. When a part can't be repaired, we rebuild it, maintain it or find it.
Component-level repair for test and equipment boards
We find the fault, replace only what failed and test the whole board before it goes back.
Test and reliability boards
- Burn-in boards
- Load boards
- Probe cards
- DUT boards
Equipment boards and modules
- Servo drives and controller boards
- Stepper drive and axis boards
- PLC systems, CPU and I/O boards
- Sensor boards and power supplies
- Motors, encoders, HMIs and displays
- Cables and connectors
Free assessmentNo minimum order100% testedUp to 3-month warrantyAfter-sales support
Design, fabrication and assembly from the original
When a board or part is discontinued, we copy it or build an improved version so the machine keeps running.
Boards and modules
- DUT, burn-in and load boards
- Probe cards
- Obsolete machine boards
- Custom modules: μB starter box, Viper module, relay checker, over-mold preheat timer, cable continuity checker
Mechanical and consumable parts
- Equipment cables: flat ribbon, KNS, WL terminal interface, BNC, Orthodyne bond head
- Contact fingers, re-plated to spec
- Pogo pins
- Heaters: ceramic bobbin, cartridge, tubular
- Rubber oil seals, O-rings and custom parts
Scheduled cleaning that prevents failed tests
Contamination on sockets and boards causes false fails. We set a cleaning schedule around your production and keep to it.
What we clean
- Burn-in boards
- Burn-in test sockets
- JEDEC trays
- Anti-static tubes
- Magazines and boat trays
How it works
- Cleaning method matched to each part
- Schedule built around your production plan
- Peripherals for production equipment included
Source, guarantee and supply
Tell us the part number. We find it through our global supply chain: new, reconditioned or obsolete.
What we supply
- Integrated circuits and electronic components
- Servo drives, motors and encoders
- PLC and CNC systems
- Power supplies
- Robotics, general and safety automation
- HMIs, displays, cables and connectors
What you can count on
- 100% genuine parts
- Standard OEM warranty
- Help with hard-to-find parts
- Quick response and delivery
Real repairs, under the microscope
The same board, before it came to us and after it left our lab. Drag across the lens to compare. No stock photos.
- Burn-in boardBurnt contact fingers rebuilt so the board seats and contacts in the oven again.
- Load boardWorn, contaminated pads restored to a clean contact surface.
- Probe cardDamaged traces and pads repaired at component level.
BEFOREAFTER
Load board, repaired in our lab. Drag to compare.
Repair or buy new? Check the numbers
Move the sliders to match your board. This is an estimate based on savings of up to 70%. Your free quote gives the real figure.
Buying new also means waiting on the maker's lead time while the tester sits idle. That cost isn't counted here.
You could keep up to
₱1,400,000
Repair cost, from about 30%Saved
Buying 4 new boards: ₱2,000,000
Get a free repair quoteFrom failed board to back on the line
You see the price and the timeline before we start, and you pay nothing for the assessment.
Tell us what failed
Send the part number, symptoms and a photo, or bring the board to our Laguna Technopark lab.
Free assessment
We find the fault and send a quote with a timeline. No minimum order, even for one board.
Repair in a controlled lab
Component-level work in our IPT Lab, with genuine parts carrying OEM warranty.
Tested and returned
Every board is tested before delivery and covered by up to 3 months of warranty.
Example repair tracker
ExampleIPT-24117: Load board, 2 units
- Received at labMon 09:12
- Fault found, quote sentMon 16:40
- Repair in progressTue 10:05
- Full board testWed 14:30
- Shipped with warrantyThu 08:15
Every repair gets a job number, so you always know where your board is.
Who we work for
Chip makers and the factories that build with their chips: automotive, medical, telecom, robotics, aerospace and defence.
Equipment owners
Handlers, testers and production machines kept running with repaired or rebuilt boards.
EMS manufacturers
Module assembly, custom fixtures and obsolete parts for contract manufacturers.
Repaired in our own lab, not sent away
Every board is repaired by our team at Laguna Technopark, inside the Special Economic Zone, in a controlled environment.
1993Inovus Technology founded in Melaka, Malaysia
2008Philippine branch opens in Laguna Technopark, Biñan
TodayRepair, rebuild and supply for chip makers across the region
Some of the companies we have worked with
Questions engineers ask us
Anything else, call or send the part number. An engineer will answer.
Do you charge for the assessment?
No. Assessment and quotation are free, and there's no minimum order.
What warranty do repaired boards get?
Up to 3 months. Your quote states the warranty for each board.
How much can we save compared with buying new?
Up to 70%. It depends on the board and the fault, so your quote shows the real number.
Our board is no longer made. Can you still help?
Yes. We repair it, source the obsolete parts, or reverse-engineer a replacement.
How long does a repair take?
It depends on the board and the fault. You get a timeline with your quote, before you commit.
Can you work with our team in Malaysia too?
Yes. Our head office is in Melaka, Malaysia, and our Philippine lab is in Laguna Technopark.
Get a free repair quote
Three quick steps. No minimum order, and the assessment is free.
Your repair request
- Board
- Burn-in board
- Quantity
- 1
- Fault
- Not described yet
- Priority
- This week
- We review your photos and part number
- Free assessment and a written quote with a timeline
- Repair, full test, and return with up to 3 months' warranty
Inovus Philippines Technology Inc.Unit B, 121 East Main Avenue, Laguna Technopark, Special Economic Zone, Biñan, Laguna 4024
Phone+63 998 555 1197
- 1Board
- 2Fault
- 3Contact